Demolition and Recycling Attachments For Sale

Product images displayed are stock photos. Item is new/unused.

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 20-25 tons. Max Opening: 31 in. Max Crushing Force: 80 tons. Weight: 3347 lb. Equipped with Swiss imported motor with rotation and imported HALLITE oil seal. Blades are both replaceable and reversible. With Swedish Hardox 500 steel • lightweight and wear-resistant; The pin is made of 42CrMo alloy steel with high strength and toughness;

to fit 12-18 ton excavator • Rotation 360° • Open/close operating pressure: 270-300 bar • Open/close oil flow rate: 70-120 l/min • weight 1135kg

60 mm Diameter Pins • 400 mm Center of Pin Boss to Center of Pin Boss • 220 mm Inside to Inside Pin Boss Spacing

to fit 9 - 25 ton excavators

to fit CAT315 •for 10-18 ton excavator • two hoses

to fit 5 •5 - 12.5 ton excavators

to fit 17 - 30 ton excavators

to fit 1.5 - 5.5 ton excavators

to fit 3 •5 - 9.5 ton excavators

to fit 5.5 - 13.5 ton excavators

to fit 5 •5 - 12.5 ton excavators

to fit 1.5 - 5.5 ton excavators

80 mm Diameter Pins • 485 mm Center of Pin Boss to Center of Pin Boss • 310 mm Inside to Inside Pin Boss Spacing

60 mm Diameter Pins • 400 mm Center of Pin Boss to Center of Pin Boss • 220 mm Inside to Inside Pin Boss Spacing

to fit 12-18 ton excavator • Rotation 360° • Open/close operating pressure: 270-300 bar • Open/close oil flow rate: 70-120 l/min • weight 1135kg

Product images displayed are stock photos. Item is new/unused.

Product images displayed are stock photos. Item is new/unused.

to fit 4 - 12 ton excavators

Fits Komatsu • Hitachi • CAT • Volvo • Daewoo • John Deere 20-30 Ton Excavators

to fit 15 - 32 ton excavators

to fit 10 - 23 ton excavators

Product images displayed are stock photos. Item is new/unused.

Product images displayed are stock photos. Item is new/unused.

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 19-26 tons. Hose Dia: l in. Chisel Dia: 140 mm. Weight: 3968 lb .Includes: 1 circuit breaker • 140mm chisel • 2 oil hoses • 1 set of nitrogen cylinder nitrogen production device • 1 pressure gauge • 1 set of toolbox and necessary maintenance tools. The reinforcement plate of the hammer shells lengthened to enhance its firmness

to fit 20 - 55 ton excavators

(2) 140mmChisels • (1) Set of Hoses • (1) Set of N2 Nitrogen Charging Kit W/ N2 Bottle & Pressure Gauge • Toil Box W/ Maintenance Tools & Operations Manual