



97 Photos
Located
Aix-en-provence, PACD, FRA
Aix-en-provence, PACD, FRA
Usage
11,447 hrs
11,447 hrs
Serial number
ZEF157WTA00000647
ZEF157WTA00000647
Loading...
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15350660
In yard
No
Features
Air Conditioner, Variable Angle Boom, 2500 mm Stick, Auxiliary Hydraulic Plumbing, Stick Check Valve, Boom Check Valves, Backfill Blade, Stabilizers, Hultdins SS550 Rotating Grapple



















Serial Number / VIN
ZEF157WTA00000647
CE Mark
CE Marked
Hour Meter / Odometer
11447 hrs, Hours may be low for age-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Exterior Lights
Some not operational, Rear lights broken, left front missing

Travel Alarm
Inoperable
Horn
Operational
Seat Belts
Operational
Safety Lock Out/Stop
Operational














Seats/Armrests
Mirrors
Steering Controls
Hydraulic Controls
Auxiliary Hydraulic Control
Drivetrain Controls
Dash Console
Glass cracked
Warning Lights
Operational
Gauges
Operational
Air Conditioner
Operational
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.












A/C Compressor
Operational
Blow-by (subjective visual observation)
Significant
Starter
Operational
Exhaust System
Radiator
Engine - Left Side
Engine - Right Side
Limited Function Check
After jump starting, the engine ran.











Limited Function Check
The drivetrain was operational., Parking break weak






















Pumps (Hydraulics)
Seepage
Valves
Hydraulic Tank
Hoses (Hydraulics)
Some leaking
Auxiliary Hydraulic Plumbing
Operational, End of stick
Hydraulic Center Swivel
Boom Lift Cylinder(s)
Stick Cylinder
Bucket Cylinder
Missing to work with clamp
Blade Lift Cylinder
Limited Function Check
The hydraulic system is weak. Left side stabiliser does not operational










Boom Condition
Stick Condition
End of stick dented
Boom Base Pin and Bushings
Pin and Bushings Boom to Stick
Pins and Bushings Stick to Coupler
Turntable Bearing
Bottom Covers
Limited Function Check
The main components were operational with damage as noted.








Blade Condition
Blade Cutting Edge Condition
Grapple
Weld repair
Items must be paid in full by Monday, January 7, 2030. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.