60 Photos
McElroy PitBull 412 Tracked Fusion Machine
Located
Lahoma, OK
Usage
2,119 hrs
Serial number
C15330
Inspection report:
This lot is protected by IronClad Assurance
Buy with confidence knowing that this lot has been given a full and detailed inspection by a qualified inspector.
ID number
#12480180
In yard
No
Manufacturer
Model
Asset type
Serial number or VIN
C15330
Features
13 in Clamp SIze, On-Board Generator, Pipe Stands, Kubota D722 3 Cylinder 14.9 kW 719 cc Diesel Engine, 7 in Rubber Tracks
Notes
ITEM AT OFFSITE LOCATION MUST BE PICKED UP BY JANUARY 3RD OR WILL BE SUBJECT TO 3RD PARTY STORAGE FEES
General Appearance
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
C15330, The serial number is not legible. This unit may be difficult to export.
CE Mark
No CE mark found
Hour Meter / Odometer
2119 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Hand Rails
Safety
Current Safety Manual
No
Current Operator/Maintenance Manual
No
Control Station
Engine Controls
Limited Function Check
The main components are in place and operational as noted.
Engine
Emission Label
Starter
Operational
Fuel System
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
After jump starting, the engine ran. The engine would not re-start after shutting down without jump starting.
Drivetrain
Drive Motors
Final Drives
Limited Function Check (Drivetrain-Track)
The drivetrain was operational without a load.
Hydraulics
Pumps (Hydraulics)
Valves
Dripping leak, The front pipe stand won’t power down.
Hoses
Hydraulic Tank
Clamp Cylinders
Carriage Cylinders
Pipe stand cylinder seepage
Fusion Machine
Generator
Manufacturer: Mecc Alte, 6 KVA rating, The main components appear to be in place. The generator is producing electricity.
Pipe Clamps
Facer / Cutter
Pipe Lift
Feed Rollers
Frame Condition
Belly Pans
Undercarriage
Left Roller Frame
Left Track Tensioner
Left Track Pads
Left Grouser Height
15 mm
Left Track Rollers
Left Front Idler
Left Sprocket
Right Roller Frame
Right Track Tensioner
Right Track Pads
Right Grouser Height
15 mm
Right Track Rollers
Right Front Idler
Right Sprocket
Specialty
Pipe Stands
Front doesn’t Lowe with power, will bleed off if valve is engaged.
Additional information
Terms of buying
Bids cannot be retracted. Everything sells "as is, where is". Read the full terms and conditions before you bid.Terms and conditionsTransaction fees
Successful buyers will be required to pay a buyer transaction fee.More detailsPayment
Items must be paid in full by Friday, December 20, 2024. Late fees will be applied after due date.
Payment optionsNeed additional information
Contact our Event site for more information.+1(817) 237-6544Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Shipping estimator
Get free, no-obligation freight quotes on shipping. This item is eligible to be shipped via uShip, which is recommended for less-than-truckload (LTL) lots.
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.